Measurements and things
to include are: • Width Below is an example of
how draft’s can be drawn up, this can be done on a drawing program,
paint program, Microsoft program, CAD program, or even hand drawn and then
E-Mailed. This particular draft was
done in CAD (Computer Aided Drawing) because I have access to a program but
for the average person this can be drawn up any way possible and it is no
problem if it doesn’t look perfect, as long as the measurements are
accurate, the advantage of doing drafts in CAD programs are that once it is
drawn you have a 3D model and the dimensions can be just plucked off of it
when it is completed. Common
thicknesses for sheet metal are... Thank you
Please follow the Link below to be directed to our new Website
www.stainless-steel-fabrications.com.au
E-Mail
Quotations
The way this works is that you draw up a
draft of what it is that you would like including some basic measurements,
and using this we will be able to send you a quote.
This process is a time saver for both you and us, and because of this you
will benefit from the cost savings. All you need to do is draw up a draft,
add some things listed below and await your reply.
• Height
• Thickness
• And Radius’s if applicable
• Thickness of steel to be used (below there is a list of common
sheet thicknesses)
• Grade of steel to be used (if you are unsure check out our page on Stainless
Steel Grades or you can visit the Stainless Properties link)
0.55 mm
0.7 mm
0.9 mm
1.2 mm
1.5 mm
1.6 mm
2.0 mm
2.5 mm
3.0 mm
4.0 mm
5.0 mm
6.0 mm
8.0 mm
10.0 mm
Upon receiving your draft document we will quote it and send you the quotation
back via e-mail or if you prefer we can call you and have a chat about it.
When you are ready to send your draft to us you can either click our E-Mail Us
link or send your e-mail to 
